Prochem Legend GT issues

[Nsabo21]

Have a Prochem Legend GT. Is it ok to run the machine needing a new coil? It continues to rev low to high about 20 min into a job.I lose minimal suction and pressure stays the same. The mechanic is saying it’s a coil issue. Others say it’s an air filter. Help me if anyone Can tell me what’s going on.

 

[Nomad74]

Have a Prochem Legend GT. Is it ok to run the machine needing a new coil? It continues to rev low to high about 20 min into a job.I lose minimal suction and pressure stays the same. The mechanic is saying it’s a coil issue. Others say it’s an air filter. Help me if anyone Can tell me what’s going on.

I would pull out the air filter, test it. if it still does it, then you can focus on the Coil. you need to get it fixed. you will cause carbon issues on your plugs if you don't.

I'm thinking it's the coil or a rectifier.

 

[steve_64]

Why not replace the coil and see if that's it?
They can go in and out while running and get worse as they get hotter.

If it goes out completely in the middle of job what would you do?

 

[Cleanworks]

If you already saw the mechanic and he told you what was wrong, why didn't you have him fix it?

 

[Nsabo21]

I would pull out the air filter, test it. if it still does it, then you can focus on the Coil. you need to get it fixed. you will cause carbon issues on your plugs if you don't.

I'm thinking it's the coil or a rectifier.

The mechanic has ordered the coil. Where is the air filter?

 

[Nsabo21]

If you already saw the mechanic and he told you what was wrong, why didn't you have him fix it?

He has to order the part. Doesn’t come till later this week

 

[Cleanworks]

He has to order the part. Doesn’t come till later this week

I wouldn't run it until it's fixed. Had the same issue with a Honda engine. Coil was cracked. It would kick on and off. Very hard on the entire unit.

 

[hogjowl]

Do,

He has to order the part. Doesn’t come till later this week

So, you’re really just here to annoy Canadians.